StrongClean FINISH (E57) - cleaner for gloss and matte surfaces, 500 ml | Démos trade a.s.
Hide product range Assortment
Edges, wall end profiles, glues Adhesives, sealants, foams, silicones Cleaners StrongClean FINISH (E57) - cleaner for gloss and matte surfaces, 500 ml

StrongClean FINISH (E57) - cleaner for gloss and matte surfaces, 500 ml

Product range code 473814
Base price per pcs
9,96 EUR 12,05 EUR incl. VAT
In stock
Buy
Brand
Strong
Group code
303004
Unit (piece)
pcs
Divisibility
1 pcs
Packaging
20 pcs
Description and parameters

StrongClean E57 is a fast-drying alkaline cleaner for the final appearance of specially high-gloss and deep-matte surfaces. The formulation is not suitable for Riepe spraying systems!
E57 should be used before packaging furniture to maintain the clean appearance of delicate surfaces. E57 is non-flammable and its use is not restricted by safety regulations.

Removes residues completely even at low temperatures:
- Oil
- Organic dirt, fingerprints
- Greasy dirt (oils, lubricants), release agents
- Sticker residues
- Smudges from sliding surfaces of edge-banding machines
- Resin
- Smoke
- Soot
- Nicotin

Area of use:
For surface cleaning: each application should be tested beforehand.
- Laminated PB, MDF, especially in high gloss and deep matte finishes.
- Thermoplastic edges and PMMA.
- Tiles
- Wood
- Rubber
- Aluminium
- Painted surfaces
- Steel / stainless steel
- Galvanized surfaces

Cleaner E57 is also suitable for cleaning surfaces prior to painting.
The product contains no surfactants and has a reduced content of volatile organic compounds, meaning it is not subject to labeling requirements under the CLP Regulation. No special equipment is required for storage or transport (ADR is not required for flammable or otherwise hazardous substances). Therefore, the customer will not see any warning pictograms on our label.

Application:
The product is ready for immediate use
- The most pronounced effect for a perfect surface finish is achieved by using a microfiber cloth.
- Apply to a microfiber/cotton/paper cloth and wipe the area clean.
- Spray onto the surface and wipe with a microfiber, cotton, or paper cloth.
- Pouring a 0.5 L bottle into a Kimberly-Clark wipe dispenser.
We recommend spraying a thin layer onto the surface to be cleaned and allowing E57 to act for 10 seconds. For surfaces contaminated with coarser or more stubborn dirt, it is recommended to first apply StrongClean E13, wipe it completely, and then use E57 to refine the surface. E57 does not damage the lacquered finish of delicate surfaces and restores gloss or matte to its original appearance.

Packaging and storage:
The product does not require special storage or handling conditions (CLP Regulation). Once opened, it is ready for use. The shelf life is 24 months from the productiuom date. Store in temperate conditions. The product should not be allowed to freeze.

Parameters

Parameter Value
Base Water
Cleanser type Hand
Content 0,5 l
Use Sensitive surfaces
Related product range (accessories) (2)
Title Code Availability Divisibility/
packaging
Basic price per unit
StrongClean FINISH (E57) atomizer for 500 ml bottle StrongClean FINISH (E57) atomizer for 500 ml bottle 477610
In stock
More info
1 pcs / 1 pcs
0,81 EUR
/ pcs
0,98 EUR incl. VAT
StrongClean FINISH W-3CK Microfiber Wipe Set (3 pcs) StrongClean FINISH W-3CK Microfiber Wipe Set (3 pcs) 479353
In stock
More info
1 pcs / 10 pcs
15,71 EUR
/ pcs
19 EUR incl. VAT
Code
477610
more less
Code
479353
more less