StrongLumio sub-surface switch/dimmer 12-24V, white - mini connector

Touch switch / dimmer. Touch to switch on the lighting, touch the second touch to switch off. A long touch adjusts the lighting intensity. The adjusted intensity is maintained even after switching off. In case of power interruption, the default level is set to 100%. Voltage 12V / 24V DC. Max. alternating current 4A .Max. power: 48W (12V), 96W (24V). Dimensions: 22 x 17 mm. Hole diameter: 18mm. Connector type: MINI. Cable length - 2x 1m. 285110 TM-extension cable 1,8m MINI connector can be used for extension. Installation. First turn off the power supply to the transformer. Insert the switch into the 18mm diameter hole. Connect the cable marked OUTPUT to the light, LED strip, etc... Connect the cable marked INPUT to the transformer / transformer distribution box. Only then connect the transformer to the power supply. Attention, only for 12 V or 24 V DC (direct current). We recommend using the shortest possible cables due to losses and possible heating. Do not wrap longer cables in a ball, coil, etc., leave loosely stretched. To connect the sensor/switch with one LED strip, use the Mini-connection cable - 285094 TM-connection cable 1,8 m MINI connector. In case of connecting multiple LED strips or spotlights (max. 6 pcs, cable with Mini connector) to one sensor/switch, it is necessary to use 356328 SAL-LED 6x MINI distributor - MINI connector 0,25m. For connection of one sensor to the Strong transformer it is necessary to use the connection cable 342541 STR-prop.cable kul.kon(Jack)-MINI (fem). For connecting 2 - 6 sensors to one Strong transformer it is necessary to use 285093 SAL- LED distribution cable 6x MINI connector - Jack 0,25m.