StrongLumio switch/dimmer 12-24V 4A black connectors Mini

Touch switch / dimmer.
Touch to turn the lighting on, touch to turn it off. Long touch to adjust the lighting intensity. The set intensity is maintained even after switching off. In the event of a power interruption, the default level is set to 100%. Material - plastic.
Voltage 12 V / 24 V DC
Max. switching current 4 A
Maximum switching power: 48W (12V), 96W (24V)
Dimensions: 22 x 17 mm
Hole diameter: 18mm
Instalace
First, turn off the power supply to the transformer. Insert the switch into the 18 mm diameter hole. Connect the cable marked OUTPUT to the light, LED strip, etc.. Connect the cable marked INPUT to the transformer / transformer switchboard. Only then connect the transformer to the power supply!
Attention, for 12 V or 24 V DC only. We recommend using the shortest possible cables due to losses and possible heating. Do not wrap longer cables in a ball, coil, etc., leave loosely stretched. To connect a sensor/switch with one LED strip, use the Mini Connecting Cable - 285094 TM-connecting cable 1.8 m MINI connector. In case of connection of more LED strips or spotlights (max. 6 pcs, cable with Mini connector) to one sensor/switch, it is necessary to use switchboard 356328 SAL-LED distributor 6x MINI - MINI connector 0,25m. For connection of one sensor to the Strong transformer it is necessary to use the connection cable 342541 STR-prop.cable kul.kon(Jack)-MINI (fem). To connect 2 - 6 sensors to a single Strong transformer, it is necessary to use the 285093 SAL LED distributor 6x MINI connector - Jack 0.25m.