TERNO Magic2/1800 fittings set for wooden doors, with soft closing

Set of fittings that allows you to make a sliding door without a visible rail (in the open and closed position).
Including two dampers and including a 1800 mm guide rail.
The guide rail is installed in the door wing, the upper guide carriage is always hidden behind the door wing.
Right-left version
. Proper function requires a solid and level floor. Minor unevenness is compensated by the spring-mounted bottom carriage.
When milling, the minimum thickness of the rest of the milled part should be 20mm, the total thickness of the door min. 35-40mm..
For sash width 800 - 1800mm.
Max. load capacity 80 kg.
The lower wheels are equipped with a spring.
Not suitable for use on a carpet. If necessary, it can be solved by inserting a bar on which the lower carriages will roll.
To mount the door wing, a minimum clearance of 30 mm must be available from above. Magic2 - how is different from the original version: • extension of the damping path by 20 mm to total 50 mm, • adjustable dampers, • better protection of the door against any contact with the wall, • the possibility of horizontal and vertical, micrometric adjustment without the need to remove the door from the guide rail , • improved protection against the door falling out of the guide profile, • the lower wheels are larger, with larger diameter and bearings. the thickness of the rubber has been doubled, • quieter operation, • door width 800 – 1800 mm, • installation possible without the side covers of the guide profile. Replacement carriage set for older version of fittings - 422052 TERNO Magic set of lower carriages for older version of Magic fittings.

Product details on the manufacturer's website.