HETTICH 9398862 suspension bracket SAH 500 with lift off guard

SAH 500 suspension fitting set with integrated anti-lift safety catch. The set consists of a wall bracket (left/right) and a cabinet bracket (left/right). The wall bracket is designed for screw mounting to the wall; suitable anchoring fitting must be selected according to the wall construction. The cabinet bracket is designed for press-fitting (automated assembly) or insertion into the cabinet (manual assembly). The integrated anti-lift safety catch prevents accidental removal of the cabinet from the wall (in accordance with DIN EN 14749). The required lifting height to remove the cabinet from the suspension fitting is 6,5 mm.

One of the advantages of this fitting is its compact size, requiring very little space inside the cabinet and therefore minimally reducing the usable interior space (for example, for drawer systems).

The fitting allows 3D adjustment: Height: ±11 mm, Side: ±3 mm, Depth: +10 / -2 mm. The adjustment screws are protected against accidental loosening.

Load capacity of the suspension fitting according to DIN EN 15939:2019-11:
- 110 kg per unit in test frame A (cabinet height = 1000mm / cabinet depth = 300mm)
- 80 kg per unit in test frame B (cabinet height = 600mm / cabinet depth = 600mm)
- 50 kg per unit in test frame C (cabinet height = 300mm / cabinet depth = 600mm)

Galvanized steel – fully recyclable.

Permissible back panel thickness: 3–8 mm. The back panel must be positioned at least 16 mm from the rear edge of the cabinet. The fitting can also be used without a back panel.

If required, cover caps can be added – must be ordered separately:
1) cover cap type A
- Back panel setback (RV) = 16–20 mm.
- Back panel cut-out 134x42,5mm
2) cover cap type B
- Back panel setback (RV) = 20mm and more
-Back panel cut-out 120x30,5mm